Compared with CRT displays, LCD strip screens are more "delicate". After using the strip LCD screen for a period of time, you will find that it often accumulates a layer of dust (more obvious when looking at the side after turning off the LCD), and sometimes it may accidentally stick to various water stains. This will definitely greatly affect the visual effect. How to clean it? So, how should this strip-shaped LCD screen be properly maintained? What are the maintenance methods? Next, the LCD strip screen editor will give you a detailed introduction. The specific content is as follows:
First, turn off the power of the LCD, and then remove the power cord plug and the graphics card connection cable plug.
2. Move the LCD to a place with better natural light so that the dust can be clearly seen, which is more conducive to targeted cleaning and thus achieving a better cleaning effect.
3. There is no need for any special solution or cleaning cloth to clean the LCD strip screen. Experience tells us that clean water + soft lint-free cloth or pure cotton lint-free cloth is the best cleaning tool for the strip LCD screen (non-shedding paper towels are also fine). Pure cotton without lint can be used for cleaning
Dip a cloth in clean water and wring it out slightly. Then, use a slightly damp, soft, and lint-free wet cloth to gently wipe the dust on the strip LCD screen (do not squeeze the display screen forcefully). When wiping, it is recommended to wipe from one side of the strip LCD screen to the other until it is completely clean. Do not wave it randomly
Do not wipe with hard cloth or hard paper. At the same time, never use cleaning solutions containing alcohol or acetone, or cleaners with chemical components. Do not spray the liquid directly onto the screen surface either, as this may cause the liquid to seep into the protective film. Liquid crystal strip screen
After cleaning the strip LCD screen with a relatively damp and soft damp cloth, you can clean it again with a damp cloth that has been wrung out slightly drier. Finally, let the moisture on the strip LCD screen air dry naturally in a well-ventilated area.
